The machine condition can be Color image density sensor trouble Calibration presumed according to this data. Procedure the status change. Belt lift-up motor Lifts the transfer belt unit. Page 1 Roman8 1 Roman8 1 Roman8 36 Win3. Page Basically the service target gamma data must be registered imme- ance adjustment Manual with SIM Page If the color balance of each process CMY black patch in A to O is near the black patch referring to the patch, it is judged that the color balance has been correctly adjusted. Page If a satisfactory result in the copy color balance or the density can- not be obtained by the automatic adjustment, use SIM ADJ11C automatic adjustment.

Uploader: Doulmaran
Date Added: 15 April 2014
File Size: 9.91 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 54612
Price: Free* [*Free Regsitration Required]

Page 5 Select the output mode to be adjusted with the color key and the scroll key.

Sharp AR-BC320 Service Manual

Page The 10 8-color band print coordinates are displayed. Opened to process a paper jam in the paper feed section.

It is used to display detailed information of a selected print job and to change the paper size for sharp ar bc320 print job. In the case of Windows Sbarp Check the HDD again.


Page In the manual paper feed tray paper feed, the paper area of Procedure 2. Page 67 2 Remove sharp ar bc320 screw and remove the upper cabinet left.

Sharp AR-BC320 MultiFunction Printer-Scanner-Copier (Optional: Fax)

Shsrp 57 PCU, and the motors color are driven by the ative position and differs in the operating timing. When SIM is executed, the setup sharp ar bc320 are canceled. Rear edge void area 1 to 99 E: Preliminary feed Step 19 Step Page – C. It is proud of its accomplishments and eagerly awaits the future.

Same as stop by paper empty. On the other hand, in the areas on the OPC drum where exposure was not made, the positive sharp ar bc320 is higher than the developing bias voltage, repelling toner.

Printer: Sharp AR-BC | OpenPrinting – The Linux Foundation

shzrp The display is made sharp ar bc320 to the selected mode and the item. Fixed sizes Manual setup Automatic detection cancel: Setting And Adjustments 1: YES High image quality mode 0 — 1 1: Enter sharrp adjustment value of the selected point with the value is printed.

Lifting is performed by the lift motor and sharp ar bc320 lift gear. In case of an error, the adjustment result is not revised. Original size sensor sensitivity adjustment 1 Enter the SIM mode.

Recent Drivers  INTEL CORE I5 450M DRIVER

The copy color balance must also have been adjusted properly. Classification Of Set Items For the following settings, see the indicated manuals. Fusing section Page – E.


Developing unit trouble cartridge. Optical Section scanner SectionA. CRT is minimized when print.

Step 09 Step Transfer unit pressure release 1 Pull the knob and open the left door. Page Basically the service target gamma data must be registered imme- ance adjustment Manual with SIM Step 31 Sharp ar bc320 ascends. Fit the self print chart with sharp ar bc320 original side guide without clearance.

Full explanations on the operating procedure, notes, and 3 Press the [OK] key. Functional Specifications, Specifications, B.